Shrinkage of autoclaved lime-sand brick mechanical products:
Many things in daily life will be affected by thermal expansion and contraction of temperature. The autoclaved bricks produced by autoclaved lime sand brick machinery will also be affected by thermal expansion and contraction. The temperature is low, and the brick body shrinks. This shrinkage process is not completed in a short time, so after the brick is out of the kettle, it cannot be put into use in a hurry, and it is necessary to wait for the shrinkage to complete.
Autoclaved lime-sand brick mechanical autoclaved bricks are affected by temperature and humidity when they are out of the kettle, and shrinkage changes due to carbonization. In the first three days when the brick body is out of the kettle, the shrinkage is large, with an average daily shrinkage of 0.019mm/m; within three to thirty days, the shrinkage is 0.005mm/m per day; after thirty days, the average daily shrinkage is 0.003mm/m ; About sixty days later, the average daily shrinkage value is less than 0.001mm/m; so far until it stabilizes.
Affected by weather changes, the shrinkage time of autoclaved lime-sand brick mechanically autoclaved bricks will change, and the volume will also change slightly. So we can't rush to put it into use so as not to cause cracks in the wall to affect the appearance, and if it is more serious, it will affect the quality of the house.
The production of autoclaved bricks by autoclaved lime-sand brick machinery must strictly control every process. The industry has technicians and engineers to provide you with services and welcome your visit at any time.
Prev: Cement hydraulic brick making machine is the guardian of green water and blue sky
