Selection of autoclaved lime-sand brick equipment brick machine bucket elevator:
When using autoclaved lime-sand brick equipment brick machine-made bricks, some supporting equipment is needed to cooperate with it. Bucket elevator is necessary. A continuous conveying machine for lifting materials, a bucket elevator utilizes a series of hoppers attached to traction chains or belts to convey bulk materials upward in a vertical or near-vertical direction. It is divided into three types: ring chain, plate chain and belt.
The autoclaved lime-sand brick equipment brick machine bucket elevator is suitable for lifting from a low place to a high place. After the supply material is put into the hopper through the vibrating table, the machine automatically and continuously runs upwards. The transmission speed can be adjusted according to the transmission volume, and the lifting height can be selected as needed. As a commonly used lifting equipment, the selection of bucket elevators is restricted by many factors. Choosing the wrong model will bring endless troubles to the user. Generally, the selection of the type of brick machine bucket elevator for autoclaved lime-sand brick equipment depends on the following factors:
(1) The shape of the material: whether the material is powdery, granular or small.
(2) The physical properties of the material: whether the material has adsorption or viscosity, and whether it contains water.
(3) Specific gravity of materials: Generally, bucket elevator parameters are designed and calculated for materials with a specific gravity below 1.6. If the specific gravity of materials is too large, it is necessary to calculate the traction force and the tensile strength of the transmission part.
(4) The delivery volume per unit time.
Generally speaking, the shape of the material directly determines the unloading method of the material. The common rule is that the powdery material is unloaded by centrifugal projection, and the bulk material is unloaded by gravity. The different unloading methods determine the hopper form used by the bucket elevator. The difference is that shallow buckets and curved buckets are mostly used for centrifugal projectile unloading, while deep buckets are used for gravity unloading.
The type of hopper used in the bucket elevator of the autoclaved lime-sand brick equipment brick machine is different, and the amount of material conveyed per unit time is different.
Prev: What should I do if the bricks of the fully automatic hydraulic brick press do not demould?
