Below, I would like to introduce the 7 loopholes that are prone to occur in the brick making machine to all friends, especially those who are planning to set up a brick factory or just started:
1. The hydraulic pressure has partial load, and the oil cylinder leaks.
2. The motor of the oil pump is stopped or rotated hard, causing the motor to be burned.
3. If the pressure of the cylinder of the upper pressing head is too high, or the vibration time is too short, the upper die cannot be pressed in place, and the belly will appear in the middle of the brick when the brick is produced.
4. The vibration force of the vibrator is insufficient, and the brick production cycle is long or the bricks are loose.
5. When producing bricks, the brick surface is loose and the brick body is broken.
6. The pressure regulating valve fails.
7. Cause open welding or damage to the mold, balance arm and various parts of the host.
The above are some easy-to-occur faults put forward by our technicians for various aspects of the non-fired brick machine brick machine. I hope that the majority of brick machine users can pay attention to maintaining these, and then reduce and eliminate the occurrence of this phenomenon, so that In order to reduce maintenance, so as to produce more qualified products, let the brick making machine bring you profits.
Prev: Lightweight brick production line equipment
Next: Marble mud treatment and reuse Select brick making machine equipment
