Precautions for raw material mixing and processing of autoclaved lime sand brick machine:
In the production of autoclaved lime-sand brick machine-made bricks, it is necessary to mix the materials after a reasonable ratio. There are some things that need to be paid attention to during the mixing process:
The humidity of the selected fly ash should not be too high. If the humidity is too high, it needs to be used after dehumidification treatment. The particle size of the lime must meet the standard. If it is too large, it will directly affect the reaction with the fly ash. Pay attention to the moisture-proof measures for the lime; It should be clean and there should be no clay or debris. The autoclaved lime-sand brick machine can use the waste fly ash of the power plant to produce lime-sand bricks; it can also use fly ash, gypsum, etc. to produce dry cement. Production tests have proved that lime-sand bricks can replace red bricks as a new type of wall material for the construction of load-bearing walls.
Industrial production of lime sand bricks and other complete sets of equipment. The correct control of the temperature in the autoclave is also a factor that affects the quality of lime sand brick products. Transporting the green body into the autoclave for autoclaving can enhance the strength of the bricks and avoid the generation of gaps. Therefore, the temperature in the kettle should be strictly controlled to keep the temperature in a continuous high temperature state. the
Prev: Lime treatment process of steam-cured lime-sand brick equipment
Next: How to maintain the computer control cabinet of large cement brick brick making machine
