Lime sand brick machine equipment troubleshooting:
In the process of using lime-sand brick machine equipment, there will inevitably be some large or small faults. Small faults will affect production and extend working hours, and major faults will delay the production schedule. Therefore, maintenance and repair of lime-sand brick machine equipment is usually carried out. It is necessary to eliminate minor faults to facilitate the smooth development of production.
Lime sand brick machine equipment should pay attention to the following during use and maintenance:
1. When installing or replacing the new and old molds of the lime-sand brick machine equipment, it is necessary to avoid collisions, bumps, civilized assembly, and pay attention to protecting the molds;
2. Frequently check the mold size and welding joint status of the lime-sand brick machine equipment during use. If there are weld cracks, they should be repaired in time. If the wear is too fast, the aggregate particle size should be adjusted. If the wear is too fast and the quality of the product is affected, a new mold needs to be equipped;
3. Carefully adjust the gap between the machine, including the equal distance between the indenter and the mold core, the indenter and the moving plane of the material truck, the mold frame and the wire plate, and the relative movement must not be interfered or touched;
4. When cleaning the mold of the lime-sand brick machine equipment daily, use an air compressor and soft tools to remove the concrete residue, and it is strictly forbidden to beat or scrape the mold with gravity;
5. The replaced mold should be cleaned and oiled to prevent rust. It should be placed in a dry and flat place with support pads to prevent gravity deformation.
Prev: Cost-saving method of hydraulic unburned brick machine
Next: The function of hydraulic environmental protection brick machine is more and more diversified
