How to deal with emergencies encountered in the production of hydraulic brick machine equipment:
During the production of hydraulic brick machine equipment, there will be more or less unexpected emergencies that surprise us, and we need some solutions to deal with them:
1. Sudden parking during the start-up process will cause stuffy cars. The main reason for this is that there are too many fillers or hard objects fall into the die hole, resulting in failure to produce. At this time, stop the machine for inspection, maintain an appropriate feeding depth, and eliminate Hard object, suction pipe or filter clogged. the
Treatment method: clean the filter and oil suction pipe, and remove debris.
Inhale air from the oil suction pipe Treatment method: Check where the air leak is and repair it.
2. The oil temperature of the hydraulic brick machine equipment is too high, which is mainly due to the excessive wear of the oil pump or other components, which needs to be repaired and replaced immediately.
The oil viscosity is too high, treatment method: use the recommended hydraulic oil.
The liquid level in the oil tank is too low, treatment method: add an appropriate amount of hydraulic oil.
3. When the hydraulic brick machine equipment produces bricks, the brick surface is loose and the brick body is broken, which is mainly due to the insufficient pressure of the brick machine.
The motor transmission of the transmission pump of the hydraulic brick machine equipment is wrong. Solution: Reverse the motor.
4. During production, we sometimes see that the extruded bricks are too thick and cannot be used normally. This is mainly caused by the excessive wear of all the bearing bushes of the brick pressing mechanism and the excessive wear of the bottom of the mold.
If the hydraulic system is a vane pump, the solution: check the vane pump.
Wipe the hydraulic brick machine equipment, and lubricate the relative sliding parts of each moving part before the test machine.
Prev: How to recycle metal in the briquette machine for smelting ore such as copper and lead
Next: Performance characteristics of autoclaved lime-sand brick equipment
