China cement brick machine manufacturers help you solve problems related to bearing maintenance. As we all know, the important role of bearings in equipment is also extremely important as a cement brick machine. The bearings required for the production of equipment are selected for quality comparison. Okay, because bearings are the key to the entire equipment, you can't choose lower quality bearings because of reduced investment, you have to constantly replace parts in later production, and normal production cannot be guaranteed.
It is very troublesome for all of us to do the maintenance of the brick making machine. Among the maintenance and repairs for all mechanical equipment, the maintenance of the automatic cement brick making machine is definitely not the most difficult, but it must be a very headache. If we want to guarantee the service life of the brick-making machine, we must disassemble and replace it regularly. We need to compare the removed bearings. If there is a problem, we must replace it in time. We need to remind everyone that we need to be special when disassembling. Be careful not to damage the bearings or you will lose the reward.
Therefore, we need to pay attention to the way of disassembling and mounting the bearings. When disassembling and assembling the small bearings of China cement brick machine, we must first set a few places on the circumference of the housing to extrude the screws for the screw, so that we slowly tighten the screws Slow disassembly, so that the outer ring can be slowly disassembled. For some bearings with shell protection, we can directly use a press or slowly tap to disassemble, and when removing the inner ring, we can use a press. However, it is necessary to pay attention to the fact that the inner ring must be uniformly stressed, otherwise the inner ring of the bearing will be damaged. It is impossible for the entire brick making machine to use the same bearing, and each bearing structure is not very good. The same, so the method of disassembly is also different. We need to be very careful not to damage the bearing when disassembling, so we propose that everyone should first know the structure of the bearing when disassembling some bearings, so that we can be foolproof.
Whether it is a new cement brick machine or a second-hand brick machine, everyone should pay attention to bearing maintenance when using it. Second-hand equipment should pay more attention to it. In the early stage, no attention was paid to maintenance, but when you buy it, you should pay more maintenance to ensure The equipment can be used for production longer.
